NCMBC

INTRODUCTION TO FEDERAL CONTRACTING
2023-08-16 09:00 - 10:30 (America/New_York) | Virtual
The North Carolina Military Business Center will host “Introduction to Federal Contracting” virtually on the following dates:

January 11, 2023 from 0900-1030
April 19, 2023 from 0900-1030
August 16, 2023 from 0900-1030
December 6, 2023 from 0900-1030

About. This training is an introduction to doing business with the federal government. Topics trained include: levels of federal purchasing; how the federal government buys products, construction and engineering and non-personal services; marketing a business to the federal government; socio-economic small business programs; registering as a federal contractor; locating, identifying and responding to federal business opportunities; and resources available to assist federal contractors in North Carolina.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Register

Construction Quality Management for Contractors Class
2023-08-17 07:30 - 17:00, 2023-09-21 07:30 - 17:00 | James Melton Vocational Skills Bldg., Room 104 B/C, Coastal Carolina Community College
This course is required by both the Army Corp of Engineers (COE) and the Naval Facilities Engineering Command (NAVFAC) for contractors doing business aboard military installations. The CQM program covers the following topics: what is CQM, Contractor and Government Responsibilities, Quality Management Planning, the Contractor’s QC Plan, the Governments QA Plan, the Pre-Construction Meeting, the Coordination and Mutual Understanding Meeting, Submittals, the Three Phases of Control, Testing, Documentation, and Certification by the QC Manager that all procedures were done in accordance with the P&S. Upon successful completion of this class, a QC Certificate of Completion is awarded.
Re-certification is required every 5 years.
Class Hours: 7:30-5:00
Location: James Melton Vocational Skills Bldg., Room 104 B/C
(unless otherwise stated)
Cost: $301.00 (includes materials)
Call Carla Gavre @ 910-938-6302 or email gavrec@coastalcarolina.edu or, Continuing Education at 910-938-6294 or email coned@coastalcarolina.edu for information on registering for this class.
Please note:
There are no fee exceptions for this class. No refunds or transfers of dates or students are allowed for this class. In the event the class is canceled by the institution (Coastal) a refund or a transfer of dates shall be granted.

Women Business Leaders Forum
2023-08-21 09:00 - 14:00 | Cape Fear Community College, N Building, Room 202, 411 Front Street, Wilmington, NC, 28401
REGISTER TO ATTEND
The mission of Defense Alliance of North Carolina Women Business Leaders Forum is simple: EMPOWER Women Business Leaders in the Defense Industry with the following goals in mind:

Purposeful Growth: We seize every opportunity to drive our business to new heights.
Entrepreneurial Vision: We work strategically on our business, nurturing its expansion.
Empowered Leadership: We continuously refine our skills, becoming dynamic and influential leaders.
Innovate to Thrive: Embracing the bigger picture, we implement cutting-edge business practices.
Stronger Together: We uplift and support each other, fostering a community of growth.
Connecting Trailblazers: Elevating women by leveraging our diverse network.
Forge Collaborative Pathways: Creating unrivaled networking and partnership opportunities.
Ignite Creative Excellence: We adapt imaginative sales and marketing strategies that set us apart.

Agenda
9-9:30 a.m.
Arrivals, Check-in, Badge Pick-up, Networking Coffee and Breakfast Pastries provided by Apple Annie’s Bakery
9:30-9:40 a.m.
Welcome & Recognition of Distinguished Guests
Tammy Everett, Executive Director, Defense Alliance of North Carolina
Topic: The diverse makeup of the Defense Alliance of North Carolina including women in the military, government agencies, academia, associations and professional services.
9:40-10 a.m.
Welcome
Natalie English, President & CEO, Wilmington Chamber
10-10:20 a.m.
Opening Remarks
Iris Phillips, President/CEO Grace Federal Solutions, LLC., Women in Business Leaders Forum Chair, Defense Alliance of North Carolina
Topic: How women can and are supporting the defense industry in various leadership roles.
10:20-10:40 a.m.
Special Guest Speaker
Elaine Marshall, Secretary of State
Topic: Overcoming obstacles to become the first woman ever elected to a statewide, executive branch office in North Carolina. A true activist for women’s issues winning numerous state and national awards for women’s leadership.
10:40-11 a.m.
Special Guest Speaker
Dr. Fiona Baxter, Associate Director, NC State University Industry Expansion Solutions (IES) and Assistant Director, North Carolina Manufacturing Extension Partnership (NCMEP)
Topic: The road to success in leading the charge to securing more than $12 million dollars in funding from the Department of Defense to support the NC DoD supply chain impacting the defense industry and supporting the warfighter.
11-11:30 a.m.
Featured Author, “All That I Am Now That I Know”
Teresa Spangler, Founder & CEO, Plazabridge Group
Topic: 17 Life Lessons for Entrepreneurs on Winning Big, Failing Big and Dusting Off Your A#S to Do It All Over.
11:30 a.m.-noon
Networking Break & Book Signing
“All That I Am Now That I Know”
Noon-12:30 p.m.
Catered Lunch by Pine Valley Market
12:30-1 p.m.
Keynote Lunch Speaker
Machelle Baker, Secretary of the NC Department of Commerce
Topic: “You can’t be what you can’t see.”
As a native North Carolinian and mother of twin daughters, she is passionate about improving the status of women in our state. She is a member of the International Women’s Forum and OnBoard NC. Some of her work includes creating a Women’s Innovation Network at Biogen and the Lady Cardinals STEM Program for High School students while at North Carolina Department of Administration. “Improving the status of women in North Carolina is not just a woman’s issue — it is a family, poverty, and economic issue.”
1-1:15 p.m.
Closing Remarks
1:15-2 p.m.
Networking
2 p.m.
Event Concludes
Presented by:
Defense Alliance of North Carolina (DANC) and NC State University Industry Expansion Solutions (IES) Defense Industry Initiatives

Demystifying the New Federal Cybersecurity Regulations
2023-08-22 10:00 - 11:00
The North Carolina Military Business Center, North Carolina State University and the NC-PaCE (North Carolina Partnership for Cybersecurity Excellence) will host a “Demystifying the New Federal Cybersecurity Regulations” webinar on August 22, 2023. Instruction will be provided by Laura Rodgers, Director of Cybersecurity Practice, Secure Computing Institute and Director, NC Partnership for Cybersecurity Excellence at North Carolina State University.
When. August 22, 2023 starting at 10:00 am.
Where. Virtual. Log-in credentials will be emailed out the day prior.
Who Should Attend. All federal contractors
About. There have been an unprecedented number of changes in cybersecurity compliance regulations and standards in the federal government contracting space over the past few months. It is difficult to keep up wiith all the changes, and even more difficult to understand how the changes will affect your company. Join us as we help “demystify” the changes and help you understand how to implement the new regulations and standards in your company.
Recent changes include:

CMMC rulemaking is not complete and is now scheduled to roll out (slowly) in the Fall of 2024.
NIST SP 800-171 is undergoing a 3rd revision and is expected to be finalized in the first quarter of 2024.
New DFARS clause – 252.204-7024 Notice on the Use of the Supplier Performance Risk System.
New VA Acquisition Regulation (VAAR) regarding cybersecurity
New FAR clause: FAR 52.204-27, bans TikTok, or any successor application or service developed or provided by ByteDance
Three new DHS cybersecurity regulations (effective July 1, 2023)

Registration. This is a free webinar; however, registration is required to receive the log-in credentials. To register visit: https://ncmbc.us/Machform/machform/view.php?id=200173

UNDERSTANDING AND UTILIZING MATCHFORCE.ORG
2023-08-23 09:00 - 10:30 | Virtual
The North Carolina Military Business Center will host “Understanding and Utilizing MatchForce.org” virtually on the following dates:

January 18, 2023 from 0900-1030
April 26, 2023 from 0900-1030
August 23, 2023 from 0900-1030
December 13, 2023 from 0900-1030

About. This training is a comprehensive guide to using MatchForce as a tool for finding federal contracting opportunities and doing market research. In this training you will learn how MatchForce can be utilized to: match your business to contract opportunities automatically; effectively search and filter the internal database of federal contracting data; and help businesses (both prime and subcontractors) along with contracting officers do in-depth market research. Additionally, prime contractors will learn how to use the search function to search for businesses to perform subcontracting tasks, or to view businesses in an area that can perform work in certain industries. Potential subcontractors will learn how to use the search function to search for prime contractors that they may be able to partner with. Finally, you will learn how to easily access MatchForce’s internal database of federal contracting opportunities, government purchase card opportunities and future, forecast opportunities to always be aware of opportunities for your business.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Register

Manufacturing Meet-up Monthly Meeting
2023-08-24 09:00 - 10:00 | Zoom
Join us for the monthly conversation!
Meet-ups are open forums, and designed for peer conversations, so bring any manufacturing topics you would like to discuss!
REGISTER TO ATTEND

Small Business Event - Small Business Roundtable
2023-08-24 14:00 - 16:00 | Virtual
The United States Special Operations Command (USSOCOM) is hosting a Virtual Small Business Roundtable on 8/24/2023 from 2:00pm-4:00pm EST. Government participants will be the PEO for Tactical Information Systems (PEO TIS), Director of Procurement, and Director of the Office of Small Business Programs. This session will be hosted virtually. Connection details will be provided upon selection to attend.
Please note this session will be different than previous sessions. This session will highlight PEO TIS. As a part of USSOCOM SOF-AT&L, it is the mission of the PEO for Tactical Information Systems to lead the rapid and focused acquisition of state-of-the-art sensors and associated C2, emplacement, recovery, and tactical communication systems across all domains to enable total situational awareness for the SOF Warfighter. Intent of these meetings: SB Roundtables are intended to for USSOCOM to assess the state of its SB program and to allow small businesses to discuss barriers to doing business with USSOCOM, provide input as to what USSOCOM is Small Business Event – Small Business Roundtable Aug 01,doing well, and provide suggestions for ways to make doing business with USSOCOM easier. These roundtables are not meant to be an opportunity for firms to present their capabilities to USSOCOM, or to receive a forecast of upcoming requirements USSOCOM would like to have participation from all socio-economic categories and a variety of industries. Space is limited to 100 individuals; therefore, participation is restricted to one connection per small business. Therefore, each firm shall only submit one request for one individual to attend. Please note that multiple people from the same firm may participate, as long as it is from the same connection (ex. Multiple people gather in a conference room and participate using the conference room computer.) Requesting multiple slots may result in no participants from the firm being selected to participate. Expected of attendees: We are actively soliciting your comments/feedback. Please be willing and prepared to engage/discuss. When discussing barriers or ways to do business easier, please provide examples of issues and possible solutions.
TO REQUEST AN INVITATION: If interested in participating, please fill out all of the information at the following link: https://www.socom.mil/SOF-ATL/Pages/Small-Business-Roundtable-Invitation-Request.aspx
Even if you requested an invitation to a previous roundtable but were not selected to attend, you must respond to this notice in order to be considered for this roundtable.
The criteria considered when selecting attendees (in no particular order and not listed in order of importance)

Socioeconomic status (we would like representation from each socioeconomic category (SB, SDB, WOSB, HUBZone, VOSB, and SDVOSB)
Products and/or services provided (we lean more towards firms that provide what we buy, but want a variety of industries represented)
Experience with USSOCOM (we would like a mix of experienced and inexperienced firms)
The last time your firm has attended a SB Roundtable (we want to afford all firms an opportunity to attend a roundtable)
When your request to attend was received; and – Where your firm is located (we would like a mix of local and non-local firms).

Responses are due by 8:00:00 AM local time on 8/7/2023. Invitations for those selected to attend will be sent out no later than close of business on 8/15/2023. You may still submit a response after the due date. However, late submissions will be accommodated on a space available basis.
If not selected for this event, or if your response is received after the due date, your contact information will be added to the list of companies interested in attending future events.

FREIGHT CARRIER REGISTRATION PROGRAM (FCRP) – INS AND OUTS THAT EVERY FREIGHT COMPANY MUST KNOW!
2023-08-25 11:30 - 13:00 | Zoom for Government
Join the North Carolina Military Business Center on August 25 at 11:30 am for a webinar on “Freight Carrier Registration Program (FCRP) – Ins and Outs that Every Freight Company MUST Know.”
When. August 25, 2023 at 11:30 am.
About. The Surface Deployment and Distribution Command’s Freight Carrier Registration Program (SDDC FCRP) is a critical initiative that ensures utmost compliance and efficiency in freight transportation within the military logistics sphere. Join us as we delve into the intricacies of the SDDC FCRP, exploring its core principles, benefits, and impact on freight carriers operating within the military distribution network. Gain invaluable insights from industry-expert who will provide expert guidance on meeting the stringent compliance standards set by SDDC.
From understanding registration requirements to optimizing operations for streamlined military freight handling, this webinar is tailored for carriers seeking to thrive within the SDDC’s logistics landscape. We will equip you with practical tools and best practices to navigate through the FCRP seamlessly, ensuring your company’s alignment with the military’s mission-critical logistics needs.
Whether you are a seasoned industry veteran or new to military freight transportation, this webinar offers a unique opportunity to gain in-depth knowledge and engage in meaningful discussions with experts from the field.
Mark your calendars and reserve your spot now to unlock the true potential of the SDDC FCRP Program and elevate your freight operations to new heights of efficiency, reliability, and compliance within the military logistics ecosystem.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Registration link: https://ncmbc.us/Machform/machform/view.php?id=202552

Air Force Distributed Common Ground System (AF DCGS) Virtual Industry Day
2023-08-29 08:00 - 17:00 | Virtual
The Air Force Lifecycle Management Center’s (AFLCMC) Command and Control Intelligence Surveillance and Reconnaissance (C2ISR) Directorate, AF DCGS Program Office is hosting a virtual Industry Day on 29 August 2023. The purpose of this industry day is to increase industry awareness of future requirements in support of the AF DCGS weapon system, acquire market research for multiple AF DCGS project teams, and solicit feedback from industry representatives to increase competition opportunities for future initiatives, develop acquisitions strategies, and understand risks.
The AF DCGS Program Office is attempting to expand its business base and maximize competition on future requirements through FY29 comprising approximately 34 projected contracts slated for competitive or sole-source award. AF DCGS has identified requirements within historically sole source contracts and requests Industry engagement on these specific requirements to ensure the Government continues to meet its requirement of full and open competition and to maximize the Industrial competitive space for AF DCGS technology solutions.
We welcome collaboration with industry to critically review our requirements and discuss mutual issues and concerns relative to our requirements. This virtual industry day will feature an open briefing on each of the upcoming DCGS projects to include their general requirements, competition factors, and anticipated timelines.

After each project is briefed, we will open the floor for a brief discussion on each acquisition and its specific requirements. We will also accept questions in writing, to be answered following the conclusion of the Industry Day and posted on SAM.gov for Industry to access. Future industry days will be more focused and individualized to cover the specific details of upcoming acquisitions.

The Government does not intend to award a contract on the basis of the information received at this event. This Industry Day is for informational purposes only. The contents of any future RFPs take precedence over anything provided during this briefing. Questions and answers will be posted to SAM.gov and are considered public record. Any costs incurred as a result of this meeting are considered bid and proposal costs and will not be reimbursed by the Government. Each of the projected requirements discussed will be further refined in the future and advertised on SAM.gov as required when applicable. The market research conducted for each requirement will dictate the type of contract used, but we foresee use of fixed price to cost-type contracts.
If your company is interested in participating in this Virtual Industry Day, please REGISTER at https://forms.gle/vmhyT2xnxwgCBCVf6 by 14 August 2023. Contact Capt Jessica Graham(Program Manager), jessica.graham.4@us.af.mil, and copy Mr. Barry Frank (Contracting Officer), Barry.Frank@us.af.mil, if you have any further questions. Due to theexpected level of interest in the program, we are requesting company participation be limited to just one (1) meeting login each due to the parameters of our Microsoft Teams teleconference.

Primary Point of Contact:
Jessica Graham jessica.graham.4@us.af.mil
Secondary Point of Contact
Barry Frank barry.frank@us.af.mil

INTRODUCTION TO DEFENSE LOGISTICS AGENCY (DLA) INTERNET BID BOARD SYSTEM (DIBBS)
2023-08-30 09:00 - 10:30 | Virtual
The North Carolina Military Business Center will host “Introduction to Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS)” virtually on the following dates:

February 15, 2023 from 0900-1030
August 30, 2023 from 0900-1030

About. The Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS) is a web-based application that enables the vendor community to search for, view, and submit secure quotes on Requests for Quotations (RFQs). Through DIBBS, users can search for and view Requests for Proposal (RFPs), Invitations for Bid (IFB), Awards, and other procurement information. This training will provide an overview of DIBBS registration; searching solicitations; accessing technical data; submitting quotes; and searching awards.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Register

Naval Undersea Warfare Center: Wednesday with the Deputy for Small Business
2023-08-30 10:00 - 11:30, 2023-09-27 10:00 - 11:30 | Hybrid: In-person/Microsoft Teams, 3030 Hoskins Road, Levan Hall Conference Room,, Fort Sill, OK, 73503
ACTIVE: Contract Opportunity
Notice ID: 2023WWTDFSB
Related Notice
Department/Ind. Agency: DEPT OF DEFENSE
Sub-tier: DEPT OF THE NAVY
Major Command: NAVSEA
Sub Command: NAVSEA WARFARE CENTER
Office: NAVAL UNDERSEA WARFARE CENTER
General Information
Contract Opportunity Type: Special Notice (Updated)

All Dates/Times are: (UTC-08:00) PACIFIC STANDARD TIME, LOS ANGELES, USA
Updated Published Date: Jan 27, 2023 11:20 am PST
Original Published Date: Dec 16, 2022 03:00 pm PST
Updated Response Date: Dec 19, 2023 05:00 pm PST
Original Response Date: Dec 19, 2023 05:00 pm PST
Inactive Policy: 15 days after response date
Updated Inactive Date:
Original Inactive Date:
Initiative:

None

Classification

Original Set Aside:
Product Service Code:
NAICS Code:
Place of Performance:

DescriptionView Changes
Wednesday with the Deputy for Small Business is an opportunity for Industry partners to learn about doing business with the Naval Undersea Warfare Center (NUWC) Division, Keyport. Industry will learn about the types of supplies and service contract opportunities, set-aside opportunities, and how to do business with NUWC Keyport. Hear from the Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS/IMF) Deputy for Small Business, Washington State Procurement Technical Assistance Center (PTAC), Northwest Tech Bridge, and other NAVSEA Small Business Deputies (if available).
This monthly event will be both in-person and virtual on the dates listed below.
Dates: February 22, 2023; March 29, 2023; April 26, 2023; May 31 2023; June 28, 2023; July 19, 2023; August 30, 2023; September 27, 2023; October 25, 2023; November 29, 2023; December 20, 2023
Time: 10:00am – 11:30am
Location: (In-Person and Virtual)
In person location:
The Vibe Coworks
19225 8th Ave NE
Suite 201
Poulsbo, WA. 98370
Virtual: Microsoft Teams
Who: Best suites companies with the following NAICS Codes:
334511 (SEARCH, DETECTION, NAVIGATION, GUIDANCE, AERONAUTICAL, AND NAUTICAL SYSTEM AND INSTRUMENT MANUFACTURING)
541330 (ENGINEERING SERVICES)
336611 (SHIP BUILDING AND REPAIRING)
334419 (OTHER ELECTRONIC COMPONENT MANUFACTURING)
541614 (PROCESS, PHYSICAL DISTRIBUTION, AND LOGISTICS CONSULTING SERVICES)
541519 (OTHER COMPUTER RELATED SERVICES)
541511 (CUSTOM COMPUTER PROGRAMMING SERVICES)
511210 (SOFTWARE PUBLISHERS)
332710 (MACHINE SHOPS)
335314 (RELAY AND INDUSTRIAL CONTROL MANUFACTURING)
811310 (COMMERCIAL AND INDUSTRIAL MACHINERY AND EQUIPMENT REPAIR (EXCEPT AUTOMOTIV AND ELECTRONIC) AND MAINTENANCE
The above NAICS codes are not all inclusive.
Please note, Meetings are subject to cancellation or changing.
To register, send an email to the POC’s listed with the following information: Company name, CAGE Code, top NAICS Code(s), individual(s) who will be attending email address, which month(s) you would like to attend, if you will be attending virtually or in-person, and attach a capability statement. Please note, due to space limitations, in-person will be first come first serve, and only one person from your company may attend (unless space is available). Those that will be attending virtually will receive a link to the event in a separate email.
Attachments/Links
No attachments or links have been added to this opportunity.
Contact Information
Contracting Office Address

DIVISION KEYPORT NWCF 610 DOWELL STREET
KEYPORT , WA 98345-7610
USA

Primary Point of Contact

David Walz
david.e.walz.civ@us.navy.mil

Secondary Point of Contact

Juliet Roske
juliet.r.roske.civ@us.navy.mil

Defense Manufacturing Summit & Exhibition
2023-09-07 08:00 - 15:00 | Emerging Technology Institute, 16824 NC-211, Red Springs, NC, 28377
Join us on Thursday, September 7, 2023, 8 a.m.-3 p.m. (Eastern Daylight Time) at the Emerging Technology Institute, 16824 NC- 211, Red Springs, NC 28377 for an exciting event focused on defense manufacturing. The Inaugural Defense Manufacturing Summit and Exhibition will be hosted by Emerging Technology Institute (ETI), and partners, NC State University Industry Expansion Solutions (IES), Fayetteville Cumberland Economic Development Corporation and Children of Fallen Heroes. The event will connect manufacturers with Department of Defense (DoD) organizations, regional manufacturers, research and development facilities, manufacturing and academic resources.
Meet industry leaders, exchange ideas, attend informative sessions and explore the latest technologies and innovations in the field. The exhibition will feature cutting-edge products and services from top companies in the industry.
There will be informative sessions from 9 a.m. until 2:15 p.m., networking opportunities from 8 a.m. until 3 p.m., a 9/11 remembrance, live demonstrations and food trucks on location throughout the day.
There is no charge to attend or to exhibit but registration is required. We are accepting up to 50 vendors, register now and secure your spot at the Defense Manufacturing Summit and Exhibition!
Please note: there are two different registration forms (tickets), one for attendees (“General Admission”) and one for exhibitors (“Vendor Registration”). Please submit the appropriate form.
REGISTER TO ATTEND
Who Should Attend?

The event is open to all manufacturers, economic development organizations, defense industry supply chain, veterans transition groups, entrepreneurs and academia.
Any manufacturers that have interest in learning, understanding or possibly entering the DoD/federal marketplace
All manufacturers and supply chain manufacturers currently manufacturing products for the DoD
Textile manufacturers, researchers and entrepreneurs interested learning about the opportunities available through the North Carolina Defense Manufacturing Community Support Program (NC DMCSP)The purpose of the NC DMCSP grant is to support innovation in advanced textiles and wearables for the survivability, performance and lethality of the warfighter.

Disclaimer: This North Carolina Defense Manufacturing Community Support Program event was developed with financial support from the Office of Local Defense Community Cooperation (OLDCC), Department of Defense. The content of this event does not necessarily reflect the views of the OLDCC. It is meant to provide business information to defense contractors and others interested in the defense industry.
Defense Manufacturing Summit and Exhibition Objectives:

Engage with existing defense manufacturers and attract new capable businesses into the defense manufacturing marketplace.
Engage existing supply chain manufacturers and attract new capable businesses into the defense marketplace and to connect these component suppliers with federal prime manufacturers.
Inform the industrial and academic research and development ecosystem about desired future military technology requirements. Inform DoD agencies about emerging and future manufacturing innovations.
Establish a productive and direct dialogue between businesses, government and academia around critical warfighter issues in the defense manufacturing marketplace – including workforce, supply chain, inflation challenges and barriers to entry.

Defense Manufacturing Summit and Exhibition Agenda:
Thursday, September 7, 2023
8-9 a.m.
Networking with vendors and participants
9-9:30 a.m.
Welcome and overview of day’s activities
James Freeman, Founder and President, Emerging Technology Institute
Ed Henderson, Mayor, Red Springs, NC
9:30-10:15 a.m.
Two concurrent sessions
Session 1: Innovation in Defense Manufacturing
Emil Runge, Director of Programs, First Flight Venture Center
Steve McManus, Innovation Advisor, RTI, International
Session 2: Textile Manufacturing and the NC Defense Manufacturing Community Support Program (DMCSP)
Michael Mullins, Director, Defense Industry Initiatives, NC State University, Industry Expansion Solutions
Giles Beal, Client Relations Manager, Defense Industry Initiatives, NC State University, Industry Expansion Solutions
Lee Moritz, Federal Business Development, NC Military Business Center
10:30-11:15 a.m.
Two concurrent sessions
Session 3: Veterans Transition
Aaron Harper, Vice President of Veteran Employment, Veterans Bridge Home
Patrick Davis, Executive Director, The Heroes Center
Craig Wymer, Program Manager, Hiring Our Heroes
Lauren Houston, Employment Counselor, North Carolina National Guard Employment Center
Bill McMillian, Transition Services Manager, Fort Liberty, North Carolina
Session 4: Finding Advanced Technologies in the Medical Field
Steve DeLellis, Executive Director, Fort Liberty Research Institute
Dennis McGurk, Department of Defense (DoD) Strategic Account Executive (SAE), RTI International
Vincent Ho, Director, 4D Bio3 USU Center for Biotechnology
11:30 a.m.-12:15 p.m.
Session 5: What’s Happening in North Carolina
Senator Danny Britt, Jr., District 24
Representative John Torbett, District 108
Representative Jarrod Lowery, District 47
12:30-1:15 p.m.
National Anthem, 9/11 Commemoration, Skydiving Exhibition (tentative)
Ken Wasley, President and Founder, Children of Fallen Heroes
1:30-2:15 p.m.
Two concurrent sessions
Session 6: Cybersecurity for Manufacturers
Laura Rodgers, Director of Cybersecurity Practice, Secure Commuting Institute and Director, NC Partnership for Cybersecurity Excellence, NC State University
Lori Jackson, CISSP, CCP, RP, President at White Raven Security, LLC
Session 7: Introduction to Federal Contracting
Daniel Quinn, Federal Business Development, NC Military Business Center
Trent Ensley, Federal Business Development, NC Military Business Center
2:15-3 p.m.
Networking with vendors and participants
3 p.m.
Event concludes
James Freeman, Founder and President, Emerging Technology Institute

Disadvantaged Business Enterprise Outreach
2023-09-09 10:00 - 12:00 | NCDOT Division 11 Office, 801 Stateville Road, N. Wilkesboro, NC
The N.C. Department of Transportation’s Division of Highways in partnership with its Office of Civil Rights hosts regional outreach events for all 14 highway divisions. If you own a Disadvantaged Business Enterprise — whether a small, woman-owned or minority-owned business —​ NCDOT wants to work with you.
Hundreds of firms representing all types of industries participated in the first several events held on Saturdays since June 2021. ​​The next round of out reach events will take place in​​ Sept. 9 and 23.
​NCDOT’s Division of Highways advertises and awards numerous contracts each year for all sorts of transportation work. Each project is an opportunity for NCDOT to encourage DBE participation and provide equitable and balanced access for these businesses to compete on contracts.
NCDOT has multiple contract opportunities statewide, including:

Construction
Maintenance
Emergency work
Mowing
Traffic control
Tree service
Cleaning service
Litter pickup
Dead animal removal

It is important to NCDOT to collaborate with disadvantage business enterprises. As such, the department is extending an invitation to all certified firms​ to do business and learn more about the opportunities available.
RSVP TO:
Bethany Elmore 336-903-9115 email: belmore​@ncdot.gov

Lean 200: Applying the Fundamentals
2023-09-12 08:30 - 2023-09-13 16:30 | Holiday Inn Express & Suites Raleigh SW NC State, 3741 Thistledown Drive, Raleigh, NC
Course Details:
2 days, 14 instructional hours
No prior lean training or experience is required.
For location details and single session availability:
REGISTER ONLINE
About This Event:
Lean 200 encompasses two full days of hands on learning, and equips participants with practical tools and strategies to make significant and sustainable changes within their organizations. This is a 2-day, introductory course focused on the fundamental principles of Lean as well as the basic tools most organizations use to start their Lean journey. Participants will be led through an interactive simulation of an industry process to allow hands-on application and practice of the Lean tools and methodology.
Value Stream Mapping is a tool used to create a material and information flow map of a product or process. This powerful tool allows organizations to map their procedures, supplies or information from the beginning of the process through all process steps, until the process is complete. These steps make up the value stream. You begin the journey with the current state map; it shows you where you are. Then, you plan your lean journey with a future state map; it shows you where you’re going and how you’re going to get there. Based on your value stream map, you can identify and prioritize what improvements to work on first, so your process becomes streamline and efficient. There is a case study during the class to help demonstrate a Value Stream Map
During this course, we will talk about 5S: Sorting, Set-in order, Shine, Standardized, and Sustain. 5S is a tool designed to improve workplace efficiencies by reducing waste associated with poor communication due to lack of visual controls and searching for items that are necessary to perform job tasks. There is also a hands-on simulation to demonstrate the application of 5S. 5S is a very quick and easy tool to implement within any workplace.
Standardized work is necessary for any sort of improvement to begin. Have you ever noticed that everyone does things her/his own way? This practice can create issues concerning quality, safety, training of staff, and more. Before a process can be improved, it must be standard for everyone. During this course we will discuss the importance, benefits and examples of standardized work.
A3 for problem solving is a tool that Toyota is using to relentlessly improve operational performance. Central to this ability is the training of supervisors and managers in a structured problem-solving approach that uses a tool called the A3 problem-solving report. We will discuss the use of an A3 problem solving tool including when it is used, how it is used and will include hands on practice for A3 creation.
Kaizen is our most popular tool! Many organizations love the rapid and systematic way of looking at a process and, with a team of co-workers, determine how to improve the process and implement those changes in a quick and sustainable way. Kaizen is a systematic methodology to run continuous improvement projects. The methodology for running an effective kaizen will be covered during this course. Also, helpful hints from the front lines will be covered, such as team selection, pre-work, and post-work.
Recommended For:
Any professional interested in learning more about lean applications.
You Will:

Identify and apply the basic lean tools
Recognize improvements within their work areas through communication improvements, morale improvements, and quality improvements
Benchmark other organizations throughout North Carolina starting the lean implementation

Topics Covered Include:

Value Stream Mapping
5S
Standard Work
A3 for problem solving
Kaizen

Course Policies

Payment Info
Course & Cancellation Policies

Lodging Info
IES Preferred Hotels

SMALL BUSINESS UPDATES – NEW REGULATIONS AND IMPACT TO SMALL BUSINESSES
2023-09-13 09:00 - 10:30 | Zoom for Government
The North Carolina Military Business Center and the US Small Business Administration will host a “Small Business Updates – New Regulations and Impact to Small Businesses” webinar on September 13, 2023 at 0900.
When. September 13, 2023 at 0900.
Where. Zoom for Government. Log-in credentials will be emailed the day prior.
About. This webinar will provide an overview and summary of new changes to the Small Business regulations. Mr. Roman Ivey, Program Analyst with the Office of Policy, Planning and Liaison, US Small Business Administration will discuss changes, including the following:

Changes to the ownership and control requirements for the 8A BD program- allowing a change of ownership for a former participant that is still performing one or more 8(a) contracts
Clarifying language regarding that a contracting officer cannot limit an 8(a) competition to participants having more than one certification and clarifying the rules pertaining to issuing sole source 8(a) orders under an 8(a) multiple award contract
Bona fide place of business requirements (124.501k)
Ostensible Subcontractor rule (re-designated (121.103(h)(3))
Limitations on Subcontracting (125.6)
Recent Federal Court that prohibits SBAs use of Rebuttable presumption for 8(a) program
Moratorium on bona fide offices
Populate vs non-populated JVs (121.103(h)(4))
Size protest (121.1001)
Limiting Competition to SB Programs Entities (124.501, 126.609, 127.503e and 128.404(d))
Sole source awards to Individually Owned 8(a)s
Moving work previously performed under an 8(a) contract to an 8(a) MAC (124.503.1)
Inclusion of indirect costs in subcontracting plans (125.3)
Mentor-Protégé programs (125.9)
HubZone Ostensible subcontractor rule (126.601(d))
WOSB certification program sole sourcing
SDVOSB certification program sole sourcing
HubZone certification program sole sourcing

Register. This is a free event; however, registration is required to receive the log-in credentials.
REGISTER HERE

Lunch & Learn: Drones in Construction: More Than Just a Pretty Picture
2023-09-13 12:00 - 13:00 | Virtual Zoom
Instructor: Dr. Joseph M. Burgett aka “Dr. Drone”
Event Details:
Over the past few years, the use of Unmanned Aircraft Systems, commonly referred to as “drones,” has significantly increased in the construction industry. What started as a novelty toy to capture marketing images has become an invaluable tool for improving logistics, reducing costs, and supporting quality control. Drone-captured 2D images are now commonly used to create 3D models to document as-built conditions, monitor progress, and calculate material quantities. Incorporating aerial infrared thermography gives innovative contractors new insights into as-built conditions, envelope integrity, quality control, and building energy performance. In this presentation, Dr. Joe Burgett will discuss the opportunities, challenges, and barriers to leveraging drones in construction. He will also talk about the cost of starting a program, and the steps contractors should follow to operate in the national airspace.
Event Contact: Caroline Brigmon, Education Training & Workforce Development Director
REGISTER HERE

Siemens Federal Industry Day
2023-09-13 13:00 - 19:00 | MCAS Cherry Point Miller’s Landing, 4843 Jackson Drive, Havelock, NC, 28532
Siemens Smart Infrastructure cordially invites you to attend our Federal Industry Day.
Learn more about our Smart Installation of the Future solutions.
Siemens helps Federal agencies across the country make their facilities smarter, more resilient, and more responsive. Smart infrastructure solutions enhance the way we live and work by intelligently connecting energy systems, buildings, and the people who occupy them. Smart solutions capture and exchange data among automation control and multiple building systems in ways that help Federal agencies meet their energy, sustainability, and resiliency goals. We call it the Smart Installation of the Future.
REGISTER HERE

Coastal Carolina Post Golf Tournament
2023-09-14 11:00 - 20:00 | MCAS Cherry Point – Sound of Freedom Golf COurse, Marine Corps Air Station, Cherry Point, NC, 28533
MCAS Cherry Point – Sound of Freedom Golf Course
Come out and join us for a four-person scramble and support the Coastal Carolina SAME Post Education and Mentoring Fund! Check-in begins at 1100 with a shotgun start at 1200, dinner to follow at award ceremony.
Visit the Eventbrite site for registration https://www.eventbrite.com/e/same-coastal-carolina-post-ige-golf-event-tickets-685814608957?utm-campaign=social&utm-content=attendeeshare&utm-medium=discovery&utm-term=listing&utm-source=cp&aff=ebdsshwebdesktop
Cost: $80 per person Private Sector / $45 per person Military/Civil
Includes: Green fees, cart, awards, box lunch and dinner
Cheat Pack: Mulligan, Power Drive, Throws; $10.00 per Pack
Can be purchased on-line or at the event.
Deadline for registration is September 7, 2023. Please make checks payable to SAME Coastal Carolina Post and send payment and entry forms to:
Cindy Nash, Golf Tournament Chairperson/Post Treasurer
GET Solutions, Inc. a Terracon Company
5465 Greenwich Road, Virginia Beach, VA 23462
cnash@getsolutionsinc.com
Tel: (757) 518-1703, Fax: (757) 518-1704, Cell: (757) 408-3850

DARPAConnect North Carolina
2023-09-19 08:00 - 18:00 | The Joint School of Nanoscience and Nanoengineering, 2907 East Gate City Boulevard, Greensboro, NC, 27401, United States
The Defense Advanced Research Projects Agency (DARPA), the Applied Research Institute (ARI), Tougaloo College Research and Development Foundation (TCRDF), and the North Carolina Defense Technology Transition office (DEFTECH), a component of the NC Military Business Center, are excited to invite you to the DARPAConnect North Carolina Regional Pop-up event at the The Joint School of Nanoscience and Nanoengineering, a partnership between North Carolina A&T and UNC Greensboro in Greensboro, NC, on September 19th, 2023.
DARPAConnect is designed to broaden DARPA’s reach and stimulate growth and collaboration between DARPA and small businesses and education institutions new to the agency or to the national security space. With the goal of breaking down barriers of entry, this event is designed to educate, motivate, and inspire potential performers to engage with DARPA to grow the national security innovation ecosystem.
This full-day September 19th event will cover topical conversations that include:

Who is DARPA and What is DARPAConnect?
Understanding DARPA Announcements and Contract Vehicles
Engaging DARPA Program Managers
Interpreting and Shredding DARPA Solicitations
What is the Heilmeier Catechism?
Strategies for a Winning DARPA Proposal

We hope you’ll be able to join us either in person or online. The opportunity to hold one-on-one conversations with DARPA program managers and DoD stakeholders will only be offered for in-person attendees, and space is limited.

2023 NORTH CAROLINA DEFENSE SUMMIT
2023-09-26 08:00 - 2023-09-27 18:00 | Hilton Raleigh North Hills, 3415 Wake Forest Rd, Raleigh, NC, 27609
The North Carolina Defense Summit 2023 (NCDS) builds our military, community, defense industry through sharing state and national best practices. The Summit presents “best practices” in advancing North Carolina as the most military, Veteran and defense industry friendly state in the nation.
OBJECTIVES

Advocate for individual, community & installation resilience
Build installation and military host-community partnerships
Coordinate installation, defense sector, education, research

KEY OBJECTIVES

Installation and Garrison Opportunities
Installation Innovation & Modernization
Host-Community Partnerships
Public/Private Initiatives
Military Childcare Opportunities
Military K-12 Education
Installation Scorecard
Business Opportunities with Government
Military Transition Assistance
Military/Defense Research
Military License Portability
Military Spouse Employment
Transitioning Military Veteran Hiring Event

ADMISSION

General Attendee $150
Active/Reserve Military $25
Complimentary Admission:
Awardees
Military Spouses
K-12 School Liaison Officers
Speaker/Panelist/Presenters

SPONSORSHIP: Multiple Opportunities (See Registration Link)
TO REGISTER visit: https://defensecommunities.org/regional/north-carolina/

Equitable Clean Energy Advancement Initiative Workshop
2023-09-27 18:00 - 21:00, 2023-10-04 18:00 - 21:00 | Virtual
We are excited to announce the launch of the Equitable Clean Energy Advancement Initiative Pilot in North Carolina, and we invite you to be part of our first cohort!
About the Equitable Clean Energy Advancement Initiative (ECEAI): Our mission is to help minority-owned businesses in North Carolina engage with, expand, and sustainably grow in the energy industry. Throughout the 8-week Equitable Clean Energy Advancement Initiative Pilot cohort, participants will engage in hands-on workshops, interactive discussions, case studies, guest speaker sessions, and practical exercises. This comprehensive program aims to equip participants with the knowledge, skills, and resources necessary to excel in clean energy, including access to Department of Energy grants and contract opportunities.
Workshop Topics include:

Introduction to Clean Energy
Registering for SAM.gov
Regulatory Landscape for Clean Energy
Developing Clean Energy Projects
Energy Storage Solutions for Clean Energy Businesses
Building Sustainable Business Models
Clean Energy Project Financing
Cohort Graduation

Program Workshop Dates:

September 27, 2023 (Cohort start)
October 4, 2023
October 11, 2023
October 18, 2023
November 1, 2023
November 10-11, 2023 (Cohort Graduation)

Program Workshop Times: 6:00 – 9:00 pm EST
Workshops will be hosted virtually unless otherwise specified
Business Eligibility:

At least fifty-one percent (51%) of the business is owned by one or more persons who are members of at least one of the following groups: African American, Hispanic, Asian American, American Indian, Female, Disabled, or Disadvantaged.
The management and daily business operations are controlled by one or more owners of the business who are members of at least one of the groups set forth in the groups above.
Must have a minimum of 3 years business operation
Must provide goods or services applicable to the Energy Industry
This pilot ECEAI Cohort is for North Carolina-based companies
Participants must reach at least 80% attendance to complete the program.

Application Details: The deadline for applications is September 15, 2023 11:59pm. To apply, please complete the application form in its entirety ECEAI Cohort Application Form
For more information about the Equitable Clean Energy Advancement Initiative, program details, and application guidelines, please reach out to assistant program manager, Christine Edwards at christineedwards@blacksolar.org

Toyota Kata & PIT: Serious Fun!
2023-10-02 08:00 - 16:30 | Performance Instruction & Training (PIT), 156 Byers Creek Road, Mooresville, NC, 28117
Just like a race car heading into the pit stall, change arrives fast these days. Competitors emerge overnight, new technologies alter the business and labor market conditions are uncertain. How do you ensure continued success in such complex, dynamic and unpredictable conditions?
The default way people think about problems often involves jumping to conclusions and immediately seeking to solve problems, because the brain does not like uncertainty. The unconscious part of our brain takes bits of surface information, quickly extrapolates to fill in blanks and gives us a false sense of confidence in our conclusion. And then we start making costly mistakes.
Imagine how efficient your business would be if it operated like a motorsports pit crew? What if you could learn concepts to improve problem solving through experimental cycles and by making such problem solving techniques a regular habit? What if you found a program that could teach you how to relate the concepts of the pit stop back to your business?
Look at Experimental Problem Solving in a Novel Way
Toyota Kata Overview, taught at the Performance Instruction & Training (PIT) facility deep in NASCAR country, does just that. The program challenges participants to look at problem solving in a way that is entertaining and easy to understand. This is provided through the pit stop experience, a team-based event that is analyzed to evaluate performance, identify learnings and make modifications for continuous improvement.
Pit Crew activities to Drive Home Concepts of Continuous Improvement
Lean + Kata leverages a combination of classroom presentation, discussion and actual pit crew activities to drive home the concepts of continuous improvement, problem solving, efficiency, preparation and teambuilding, while addressing such topics as communication, coaching and feedback, role responsibility and work performance.
What to Expect
You’ll start your day with an orientation to high performance motorsports, followed by an activity where you become a pit crew member. This is followed by the class segment, where we learn that kata is:

Developing new habits and allowing people to think differently about problems and goals
A way of working, and of working together
Using scientific thinking as an ingredient to make teams and organizations more effective and successful
Developing a culture of continuous learning and improvement at all levels through deliberate practice

The Improvement Kata helps develop fundamental skills of working like a scientist. The learner iterates or experiments his or her way toward a desired goal instead of deciding the way forward. This way of thinking and working helps people successfully deal with uncertainty and challenges.
The Coaching Kata is a repeating routine by which the teacher or coach gives the learner procedural guidance, not solutions, helping the learner successfully overcome obstacles and develop confidence. With Toyota Kata, managers can develop their own coaching skills and their team members’ problem-solving skills simultaneously.
Instructors
The lean team from NC State Industry Expansion Solutions facilitates the lean presentations and discussions. Senior level staff of PIT Instruction and Training facilitates the motorsports presentation and activity while professional pit crew members coach the teams.
Benefits of Participating

Learn and understand the concept of improvement kata and coaching kata to improve your business.
Behave like a pit crew under pressure, apply lean principles and observe your impact on performance.
Discover the importance of developing a culture of continuous process improvement in your organization.

Cost
$1,195 for the session and volume discounts are available for 2 or 3+ participants from the same company.

Who Should Participate
Whether you are in a leadership position (manager, supervisor, front-line team leader) or a key technical resource (engineer, technician), you are a great fit for kata training. Individuals who seek a unique perspective on problem solving and people involvement are encouraged to register.
Upcoming Session
Monday, October 2, 2023

8 a.m. – Greeting and Orientation
8:30 a.m. – Lean Performance U. Presentation (breakfast provided)
8:50 a.m. – Introduction to Kata
9:15 a.m. – Baseline PIT Stop
9:30 a.m. – Training Session: Improvement Kata and Coaching Kata
12:15 p.m. – Lunch (provided)
1 p.m. – Three PDCA Improvement/Experiment Cycles utilizing the PIT Stop Experience
4 p.m. Debrief training and next steps
4:30 p.m. – Depart PIT

Training Location
Performance Instruction & Training (PIT)
156 Byers Creek Road
Mooresville, NC 28117
Register
Contact Your Regional Manager:
ncstateies.com/RM
Questions?
Call Allison Godwin at 252.883.1729

Rescheduled: Update on Inflation and Supply Chain Issues for Infrastructure
2023-10-03 09:00 - 10:30 | Webinar
Rescheduled to October 3, 2023
Hosted by North Carolina Military Business Center
In Partnership with the Defense Alliance of North Carolina;
the American Council of Engineering Companies of North Carolina
and the Society of American Military Engineers
Purpose: As a follow-up to the 2023 Southeast Construction, Infrastructure and Environmental Summit’s “Industry and Government” exchange sessions in Wilmington, the following webinars and in-person event will be held to discuss: issues of inflation; supply chain issues; labor challenges; acquisition policies; and other issues that may affect North Carolina contractors working with the federal government.
When:

Webinar: October 3 beginning at 0900. Topic: Update on Inflation and Supply Chain Issues for Infrastructure. This session will have industry members share experiences and best practices to address inflationary, supply chain and communications concerns between government and Industry partners on government contracts. While inflation and supply chain issues have abated somewhat, what is/can DoD do to help in mitigating some of the impact to federal contractors? For example, use of economic price adjustment clauses in contracts, extraordinary contractual relief procedures, progress payments, these are just a few possible solutions. Who should attend: General and Specialize trade contractors working within the federal government.

Registration. Webinars and the in-person event are free; however, registration is required. Register here: https://ncmbc.us/Machform/machform/view.php?id=203038

Industry Day: Rollinson Channel Maintenance Dredging Contract
2023-10-04 13:00 - 14:00
Contract Scope: Approximately 200,000 – 300,000 cubic yards of material is to be removed from Rollinson Channel, Hatteras Connecting Channel, Hatteras Ferry Channel Ranges 4 and 5, Barney Slough South, and Sloop Channel North. Placement of dredged material from Rollinson Channel, Hatteras Connecting Channel, Hatteras Ferry Channel Ranges 4 and 5, and Barney Slough South will be in the Nearshore area adjacent to a National Park Service Beach at Hatteras. Placement of dredged material from Sloop Channel North will be in the Nearshore off a National Park Service Beach at Ocracoke. The dredging shall be performed by hydraulic pipeline dredge. Method of placement of dredged material will be by control of effluent for nearshore placement. There will not be an environmental window for placement.
When. 4 October 2023 @ 1300
Where. Webinar Access: https://usace1.webex.com/join/coley.h.cordeiro
1-844-800-2712
Access Code: [REDACTED] 065 9329
Contacts.
Coley Cordeiro
Project Manager
(910) 251-4671
Coley.H.Cordeiro@usace.army.mil
Ros Shoemaker
Contracting Officer
(910) 251-4436
Rosalind.M.Shoemaker@usace.army.mil

Introducción a la contratación federal para propietarios de pequeñas empresas (en línea)
2023-10-05 18:00 - 19:30 | Online Webinar
Topic: Government Contracting
Para vender sus productos o servicios al gobierno federal, su pequeña empresa debe cumplir con requisitos específicos. Aunque el proceso de contratación puede parecer complicado y abrumador al principio, el gobierno brinda información y consejos para ayudarlo a aprender a competir como contratista federal en Carolina del Norte.
Speaker(s): Olivia Chavez-Carroll
Co-Sponsor(s): Centro de negocios militar de Carolina del Norte
Se enviará un enlace de registro de Zoom después de registrarse para esta clase.
Fee: No Cost
REGISTER HERE

OSHA 2015 Hazardous Materials
2023-10-10 08:00 - 2023-10-13 17:00 | Holiday Inn Express & Suites Raleigh SW NC State, 3741 Thistledown Drive, Raleigh, NC
Course Details:
4 Days, 30 Instructional Hours
30 MESH Hours (Manager of Environmental Safety and Health)
30 PDHs (Professional Development Hours for Engineers)
This course is eligible for credit towards the Safety & Health Fundamentals Certificate.
For location details and single session availability:
REGISTER HERE
About This Event:
This course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials.
Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and understand proper moving, storing, and handling of hazardous materials.
Recommended for:
Environmental, safety and health managers and employees who work directly with OSHA classified hazardous materials.
Participants will:

Be able to assess compliance with OSHA hazardous materials standards
Determine hazardous (classified) locations
Describe proper moving, storing, and handling of hazardous materials

Topics include:

Flammable liquids
Compressed gases
LP-gases, and cryogenic liquids
Spraying and dipping processes
Use of electrical equipment in hazardous locations

Course Policies

Payment Info
Course & Cancellation Policies

Lodging Info
IES Preferred Hotels

Course Info

Registration
For location details and single session sign-ups: REGISTER ONLINE
Instructor
Mac McNulty
Glenn C. Clapp EFO, CHMM, CFPS
Upcoming Dates
Location: Raleigh NC
Start Date: October 10, 2023
End Date: October 13, 2023
Time: 8:00AM – 5:00PM
Cost: $850
Click to register for this session

Equitable Clean Equitable Clean Energy Advancement Initiative Workshop
2023-10-11 18:00 - 21:00 | Virtiual
