2024 Medical, Biomedical & Biodefense: Support to the Warfighter Symposium
2024-06-11 08:00 - 2024-06-12 17:00 (America/New_York) | University of North Carolina, The Friday Center, 100 Friday Center Drive, Chapel Hill, NC, 27517, United States
EVENT INFO

The Office of US Senator Thom Tillis, Office of US Senator Ted Budd, the North Carolina Military Business Center and the North Carolina Biotechnology Center will host the Medical, Biomedical & Biodefense: Support to the Warfighter Symposium in Research Triangle Park and Chapel Hill, North Carolina on June 11-12, 2024.

For more information or to register visit: https://mbb.ncmbc.us/

HOSTED BY:

Office of United States Senator Thom Tillis
Office of United States Senator Ted Budd
North Carolina Military Business Center
North Carolina Biotechnology Center

SYMPOSIUM PARTNERS.

First Flight Venture Center
UNC System
North Carolina Defense Technology Transition Office (DEFTECH)
North Carolina Center for Optimizing Military Performance (NC-COMP)
Defense Alliance of North Carolina

WHEN. June 11-12, 2024
WHERE.

June 11: Pre-Symposium sessions – North Carolina Biotechnology Center, 15 T. W. Alexander Drive, Research Triangle Park, North Carolina 27709

Directions to NCBiotech

June 12: University of North Carolina, The Friday Center, 100 Friday Center Drive, Chapel Hill, NC 27517

Directions to the Friday Center
Printable Parking Pass

Directions and Map
Medical Support to the Warfighter, will connect businesses in North Carolina with military and other federal agencies that require or purchase medical supplies, equipment, devices, pharmaceuticals, medical information technology and medical services. Representatives from the Departments of Defense, Veterans Affairs and Health and Human Services, their prime vendors and major contractors – from national commands and from bases, commands and facilities in North Carolina – will highlight current technology or resource gaps and needs, future requirements and procurement processes to supply military and federal medical facilities and agencies. All medical-related businesses in North Carolina – large or small, prime contractors, subcontractors, suppliers, manufacturers and service providers – will benefit from briefings on military requirements, procurement processes and supplier qualifications, from informal networking with buyers and users, and from exhibiting or viewing demonstrations of the latest medical technologies designed to support America’s warfighters.
The Biomedical and Biodefense Support to the Warfighter track will focus on establishing dialogue between industry and academia-based technology innovators and military and government officials to address the current and future biomedical and biodefense needs of the military and our nation.

How to Start a Business - Online
2024-06-11 18:00 - 19:30 | Online Webinar
Topic: Start-up Assistance

Understand the basics of starting a for-profit business in this webinar that takes you from idea to opportunity. Learn key strategies for start-up, financing, and marketing, as well as important information about legal issues, licensing, zoning, operations, and more. Realize the importance of a self-assessment and how to evaluate the feasibility of your business idea. Discover the resources available to help you start and successfully operate your business.
Register by: 4:00 PM June 11
NOTE: For this webinar, there is a two-step registration process. Once you complete your registration with the Small Business Center (SBC), you should receive a confirmation email from centeric@centeric.ncsbc.net that includes a Zoom link for the second part of the registration process. If you do not see the confirmation message in your inbox, please check your junk/spam folder. In order to receive the video conferencing login information and guarantee your spot for the webinar, you must also register via the Zoom platform.

Speaker(s): Melissa Evans, SBC Director
Co-Sponsor(s):
Fee: No Cost
Register Online
Already Registered? Sign in for more information.

Phone: 252-246-1209
Email: msevans@wilsoncc.edu

Lunch + Learn: Sourcing (Manufacturing) Supplies Closer to NC
2024-06-12 08:00 - 17:00 | The Chesterfield Building, 701 West Main Street, Ste 203, Durham, NC, 27701
NC State Industry Expansion Solutions presents a new series of Lunch and Learn opportunities. Registration is required and lunch provided.
REGISTER BY JUNE 14
Do you have a supplier need or would you like to become a supplier to another company? Supplier matching is a powerful tool that can help North Carolina manufacturers connect with suitable suppliers. Manufacturers can streamline their operations, improve product quality and ultimately drive business growth by finding suppliers who align with their specific needs and goals.
During this lunch and learn, the supplier matching team at NC State University Industry Expansion Solutions (IES) will provide information on the program, the types of opportunities available and how to access these no-cost supplier sourcing and matching services. You’ll also learn how program participation can help companies differentiate themselves, offset global risks, strengthen supply chains in NC and the country and most importantly, grow your business.

Export Coffee Talk: Expanding Your Life Sciences Activities to Europe - Discover What the Paris Region Has to Offer
2024-06-12 10:00 - 11:30 | Webinar via Zoom
Description
Join us for our next Export Coffee Talk on June 12th 10-11am EST to discover what the Paris Region can offer for Life Science companies. With our expert panelists, you will:

Learn about the French Life Sciences market and regulatory framework
Explore business opportunities in the Life Sciences ecosystem in the Paris Region
Gain insights into how to do business with French companies from a cultural perspective
Understand how to set up a company and access incentives in France
Get feedback from an American company that successfully expanded to France

Panelist Information:
Yann Masson, Life Sciences Expert, Choose Paris Region
Yann is the Healthtech & Life Sciences expert at Choose Paris Region. His focus is guiding Life Sciences companies looking to explore the large Paris Region ecosystem.

Cécile Jupin, Investment Manager USA, Choose Paris Region
Cécile coordinates the US office for Choose Paris Region, helping US companies to build connections with Paris Region.

Thibaut Issindou , Co-Founder, Gapsmoov
Thibaut is the co-founder of Gapsmoov, a digital learning platform dedicated to intercultural management to support companies in dealing with new business cultures.

Hélène Sire, Site Director Spatners, Biolabs France
Hélène is the Site Director for Biolabs’s incubator in Paris Saclay named “Spartners”. This incubator designed with Servier aims to provide co-working space for life sciences startups in a top research environment.

Some questions that will be covered during this coffee talk:

What are the Life Sciences business opportunities in France and the Paris Region?
Why is the Paris Region a top tier Life Sciences cluster?
What is the regulatory framework for medical products in France?
What are the incentives to do R&D in France?
What’s the talent pool in France?
How can I develop my company in France?
What’s the business etiquette for doing business in France?
What are the successful American biotech companies that set up

REGISTER

Thread Capital Financing for Your Small Business (NEW) - Online
2024-06-12 12:00 - 13:00 | Online Webinar
Topic: Financing

Are you seeking to start or expand a small business? Would you like to consider alternative financing? Join us for an overview of the resources available for small businesses in North Carolina, and learn how to access credit and capital through Thread Capital, a nonprofit subsidiary of the NC Rural Center that provides loans up to $100,000. We will also review the six basic principles many lenders use to make credit decisions and offer information about lending criteria, the application process, and how to qualify even if you have no credit history.
Register by: 10:00 AM June 12
NOTE: For this webinar, there is a two-step registration process. Once you complete your registration with the Small Business Center (SBC), you should receive a confirmation email from centeric@centeric.ncsbc.net that includes a Zoom link for the second part of the registration process. If you do not see the confirmation message in your inbox, please check your junk/spam folder. In order to receive the video conferencing login information and guarantee your spot for the webinar, you must also register via the Zoom platform.

Speaker(s): Myra Belgreat, Thread Capital
Co-Sponsor(s):
Fee: No Cost
Register Online
Already Registered? Sign in for more information.

Phone: 252-246-1209
Email: msevans@wilsoncc.edu

HERE COMES SUMMER SOCIAL NETWORKING PARTY
2024-06-12 16:00 - 18:00 | Level 7 Rooftop Bar, 101 Park at North Hills, Raleigh, NC, 27609
The NCWTA Triangle Chapter is ready to welcome summer and YOU are invited!
This social networking party will also celebrate two of our chapter members, Regions Bank and Sciencix, that have just received the prestigious Presidential “E” Award!
Come raise a glass (or bottle) with this dynamic and fun group of Triangle area business professionals who are highly connected and engaged with NC’s international business landscape. You’ll make new friends, hear some great business success stories, learn some business tips, share some laughs, and unwind after the workday in the chic setting of the AC Hotel’s Level 7 Rooftop Bar overlooking the city skyline.
FREE for members, $15 for non-members, $10 for DEFTECH members — and your first drink is on us!
Register now to reserve your spot!
REGISTER NOW

Exporting Procedures: Import & Export Trade Compliance Seminar
2024-06-18 08:30 - 16:00 | Courtyard Charlotte Airport North, 2700 Little Rock Road, Charlotte, NC, 28214
Export Documentation and Procedures. Our most comprehensive course will provide an in-depth understanding of export regulations and procedures combined with a study of the appropriate documentation that will give you a valuable advantage in making your international trade business a success. Learn to comply with regulations to avoid violations, fines, fees, and delayed shipments. Learn the particulars of export documents and why they are critical. Accurate documents will equate to successful international transactions with no unexpected costs for you or your customer. Be aware that some items require an export license. Join us for this interactive, in-person course. Registration includes a valuable reference book.
Gain a distinct competitive advantage over your rivals by deepening your understanding of customs and regulatory obligations. Our comprehensive trade seminars in Charlotte are designed to empower you to protect yourself and your company from fines and penalties while minimizing risks and optimizing your trade compliance program.
What makes our seminars special? The power of face-to-face interactions cannot be underestimated. By attending our seminars, you’ll have the opportunity to expand your professional network with like-minded individuals within your industry, boost your productivity, and ignite your motivation to excel. We are committed to ensuring you derive the maximum value from our courses, which is why we eagerly anticipate the chance to meet you in person very soon.
Don’t miss this opportunity to enhance your expertise in trade compliance. Join us at GTC and gain your full potential
LOCATION
Courtyard Charlotte Airport North
2700 Little Rock Rd
Charlotte, NC 28214
704-319-9900
www.marriott.com/cltca
SEE MORE DATES
REGISTER

How to Write a Business Plan – Online
2024-06-18 12:00 - 13:30 | Online Webinar
Topic: Start-up Assistance

A business plan can be the most important tool for a small business owner. Learn how to turn your ideas into a solid plan for financing and long-term success. Learn the important components of a business plan, and lay the foundation for a winning plan. Find out how marketing, operations, and finance are interrelated. Discover how a business plan is used by potential lenders, the do’s and don’ts of writing a plan, and steps for making the process easy. This webinar is designed for new and established business owners.
Register by: 10:00 AM June 18
NOTE: For this webinar, there is a two-step registration process. Once you complete your registration with the Small Business Center (SBC), you should receive a confirmation email from centeric@centeric.ncsbc.net that includes a Zoom link for the second part of the registration process. If you do not see the confirmation message in your inbox, please check your junk/spam folder. In order to receive the video conferencing login information and guarantee your spot for the webinar, you must also register via the Zoom platform.

Speaker(s): Melissa Evans, SBC Director
Co-Sponsor(s):
Fee: No Cost
Register Online
Already Registered? Sign in for more information.

Phone: 252-246-1209
Email: msevans@wilsoncc.edu

TARIFF CLASSIFICATION: Import & Export Trade Compliance Seminars
2024-06-19 08:30 - 16:00 | Courtyard Charlotte Airport North, 2700 Little Rock Road, Charlotte, NC, 28214
Classification for import, export, FTA determination & clarification on Section 301 and Section 232. The classification & valuation of goods are major decisions! Critical information not only for duty purposes but also to determine whether goods are subject to quotas, restraints, embargoes, or other restrictions. Shipments with incorrect classifications may not reach their destination and/or you may be subjected to penalties. Join us for this interactive, in-person workshop. Registration includes a valuable reference book.
Gain a distinct competitive advantage over your rivals by deepening your understanding of customs and regulatory obligations. Our comprehensive trade seminars in Charlotte are designed to empower you to protect yourself and your company from fines and penalties while minimizing risks and optimizing your trade compliance program.
What makes our seminars special? The power of face-to-face interactions cannot be underestimated. By attending our seminars, you’ll have the opportunity to expand your professional network with like-minded individuals within your industry, boost your productivity, and ignite your motivation to excel. We are committed to ensuring you derive the maximum value from our courses, which is why we eagerly anticipate the chance to meet you in person very soon.
Don’t miss this opportunity to enhance your expertise in trade compliance. Join us at GTC and gain your full potential
LOCATION
Courtyard Charlotte Airport North
2700 Little Rock Rd
Charlotte, NC 28214
704-319-9900
www.marriott.com/cltca
SEE MORE DATES
REGISTER

Construction Quality Management for Contractors
2024-06-20 07:30 - 17:00, 2024-07-17 07:30 - 17:00 | James Melton Vocational Skills Bldg., Room 104 B/C, Coastal Carolina Community College
This course is required by both the Army Corp of Engineers (COE) and the Naval Facilities Engineering Command (NAVFAC) for contractors doing business aboard military installations. The CQM program covers the following topics: what is CQM, Contractor and Government Responsibilities, Quality Management Planning, the Contractor’s QC Plan, the Governments QA Plan, the Pre-Construction Meeting, the Coordination and Mutual Understanding Meeting, Submittals, the Three Phases of Control, Testing, Documentation, and Certification by the QC Manager that all procedures were done in accordance with the P&S. Upon successful completion of this class, a QC Certificate of Completion is awarded.
Re-certification is required every 5 years.
Class Hours: 7:30-5:00
Location: James Melton Vocational Skills Bldg., Room 104 B/C (unless otherwise stated)
Cost: $301.00 (includes materials)
Call Continuing Education at 910-938-6294 or email coned@coastalcarolina.edu, or Carla Watkins @ 910-938-6302 or email watkinsc@coastalcarolina.edu for information on registering for this class.
Please note: There are no fee exceptions for this class. No refunds or transfers of dates or students are allowed for this class. In the event the class is canceled by the institution (Coastal) a refund or a transfer of dates shall be granted.

USMCA THE MODERNIZED NAFTA: Import & Export Trade Compliance Seminars
2024-06-20 08:30 - 16:00 | Courtyard Charlotte Airport North, 2700 Little Rock Road, Charlotte, NC, 28214
USMCA is the new Modernized NAFTA. This course is for those new to USMCA and for those already familiar with NAFTA. Learn what the new changes mean for you and how it will affect your current NAFTA process in this USMCA. Special sectors will be discussed and covered. You may need to change your supply chain to continue to benefit under the new agreement. USMCA is probably the most complex Free Trade Agreement. Join us for this interactive, in-person course. Registration includes a valuable reference book. See All USMCA Dates
Gain a distinct competitive advantage over your rivals by deepening your understanding of customs and regulatory obligations. Our comprehensive trade seminars in Charlotte are designed to empower you to protect yourself and your company from fines and penalties while minimizing risks and optimizing your trade compliance program.
What makes our seminars special? The power of face-to-face interactions cannot be underestimated. By attending our seminars, you’ll have the opportunity to expand your professional network with like-minded individuals within your industry, boost your productivity, and ignite your motivation to excel. We are committed to ensuring you derive the maximum value from our courses, which is why we eagerly anticipate the chance to meet you in person very soon.
Don’t miss this opportunity to enhance your expertise in trade compliance. Join us at GTC and gain your full potential
LOCATION
Courtyard Charlotte Airport North
2700 Little Rock Rd
Charlotte, NC 28214
704-319-9900
www.marriott.com/cltca
SEE MORE DATES
REGISTER

COUNTRY OF ORIGIN DETERMINATION: Import & Export Trade Compliance Seminars
2024-06-21 08:30 - 16:30 | Courtyard Charlotte Airport North, 2700 Little Rock Road, Charlotte, NC, 28214
Country of Origin Determination, how do you get it right? A rule of origin is a standard for determining where a product is from that may be used for several different regulatory purposes such as eligibility for tariff preference under various bilateral and multilateral trade agreements. Not only for FTA’s but rule of origin is also crucial in these days of anti-dumping and section 201, 232, and 301 duties. This course will help you understand substantial transformation, the rules of origin for determining the Country of Origin for FTAs, and markings for U.S. Government procurement. You will also learn how to document your work. Each registration includes a copy of the instructor’s presentation in place of a book.
Gain a distinct competitive advantage over your rivals by deepening your understanding of customs and regulatory obligations. Our comprehensive trade seminars in Charlotte are designed to empower you to protect yourself and your company from fines and penalties while minimizing risks and optimizing your trade compliance program.
What makes our seminars special? The power of face-to-face interactions cannot be underestimated. By attending our seminars, you’ll have the opportunity to expand your professional network with like-minded individuals within your industry, boost your productivity, and ignite your motivation to excel. We are committed to ensuring you derive the maximum value from our courses, which is why we eagerly anticipate the chance to meet you in person very soon.
Don’t miss this opportunity to enhance your expertise in trade compliance. Join us at GTC and gain your full potential
LOCATION
Courtyard Charlotte Airport North
2700 Little Rock Rd
Charlotte, NC 28214
704-319-9900
www.marriott.com/cltca
SEE MORE DATES
REGISTER

SAME SOUTHEAST TRI-REGIONAL JOINT ENGINEERING TRAINING SYMPOSIUM (JETS) 2024
2024-06-25 08:00 - 2024-06-27 17:00 | Marriott Savannah Riverfront Hotel, Savannah, GA
Join the SAME Charleston and Savannah Posts on June 25-27, 2024 (Tuesday through Thursday), at the regional networking event of the year! In addition to featured speakers, technical sessions, federal agency briefings and exhibit hall networking, our full conference event registration also includes a Riverboat Opening Reception (walking distance from conference venue)! We will be hosting this year’s event at the Marriott Savannah Riverfront Hotel, located in historic downtown Savannah. The venue is surrounded by historic attractions, chic boutiques, and famous landmarks. An 18-hole Scholarship Golf Tournament will also be held at The Club at Savannah Harbor on Tuesday, June 25, 2024. Register today to experience SAME Southern hospitality at its finest!
PROGRAM BROCHURE AVAILABLE FOR DOWNLOAD (available prior to conference)
JETS 2024 Waiver: The participant acknowledges and accepts this waiver and release by registering for this event/activity through the on-line registration process and checking in to receive a participant badge prior to entering and attending this event/activity. Any transfers of registration to another participant include agreement with this document for the registration transfer to be valid. See JETS 2024 Waiver for more details.
IMPORTANT DATES

November 2023

Registration and Sponsorship Opens

8 December 2023

Call for Abstracts for Technical Sessions Opens

15 February 2024

Deadline for Abstract Submissions

1 May 2024

Early Bird Registration Deadline

1 May 2024

Call for Volunteers (Coming Soon)

1 June 2024

Golf Registration Deadline

1 June 2024

Deadline for Sponsors Ads inclusion in program

23 June 2024

Online Registration closes (additional $50 walk-in fee applies)

25-27 June 2024

JETS 2024

Cognitive Space Operations (COGSPO) Reverse Industry Day
2024-06-25 09:00 - 17:00 | 820 SAS Campus, 820 SAS Campus Dr, Cary, NC, 27513
This event will bring together 300+ military, government civilian, and industry professionals to discuss how Artificial Intelligence/Machine Learning technologies will engage in cognitive processes and decision-making for the future force with an emphasis on sustained space maneuver. A key component of this event is discussing how Cognitive Space Operations (COGSPO) will enable the joint forces through accelerated decision cycles and enhanced situational awareness. This event is an opportunity to discuss and assess broad interest across the United States Space Force, United States Space Command, and industry on how COGSPO can be a force multiplier and best ways to leverage it. By the end of this two-day event, leadership across government and industry should have a better understanding of how COGSPO is defined, envisioned, and execution needed to improve space operations and assist with National Security of the U.S., partners, and allies. A confirmed keynote speaker for the event is General Michael A. Guetlein, Vice Chief of Space Operations, United States Space Force.

Registration Information
Due to limited seating, we request no more than two people per company.
All attendees (both USG and industry) must pay in advance for your meals. The total cost is $65 which covers breakfast and lunch for both days. Please see instructions and link below —
Registration is a two step process. Step `1: Select a ticket though this eventbrite website in the upper right corner of this webpage. Step 2: Follow the link below to pay the $65 fee directly on the SAS website.
Instructions to pay for fee:
1) Click link below to create an account.
2) You will receive an email to complete your account registration.
3) Return to the link to complete payment for your meals. Please make sure to select “Pay by Credit Card” when paying.
REGISTER: 2024 Cognitive Space Operations Reverse Industry Day Conference

Additional Offerings

If you are interested in having a booth at this event, please email addie.wise@sas.com to confirm this request. All vendors will be provided a 5 ft x 2 ft table, power cord and two chairs. No other items will be provided. Vendors will need to bring any other materials, etc. needed for their booth. Shipping to the event location will not be permitted. The booth will be open for two-hours during the second day of the event.

If you are requesting a 20-minute one-on-one with program office leadership please send a requst email to thomas.poupakis.3.ctr@spaceforce.mil with the company name, solution technical readiness level, Space Force mission area requested, and company POC. The SSC Front Door will attempt to match companies to the best program offices but 1v1 meetings are not guaranteed.

Hotel Information
Embassy Suites RTP
201 Harrison Oaks Blvd
Cary, NC 27513
919-677-1840
800-EMBASSY
1 mile from SAS Campus
(4 minutes)
Hampton Inn & Suites
Raleigh/Cary
111 Hampton Woods Lane
Raleigh, NC 27607
919-233-1798
2.5 miles from SAS Campus
(6 minutes)
Four Points by Sheraton Raleigh Arena
1200 Hurricane Alley Way
Raleigh, NC 27607
919-854-0502
2.9 miles from SAS Campus
(6 minutes)
Hyatt Place Raleigh West
710 Corporate Center Drive
Raleigh, NC 27607
919-233-2205
3 miles from SAS Campus
(6 minutes)
Hilton Garden Inn – RDU
1500 RDU Center Dr
Morrisville, NC 27560
919-840-8088
4 miles from SAS Campus
(9 minutes)
The Mayton Inn
301 S Academy St
Cary, NC 27511
919-670-5000
4.4 miles from SAS Campus
(11 minutes)
Doubletree Hilton Raleigh–Cary
500 Caitboo Avenue
Cary, NC, 27518
919-239-4777
8 miles from SAS Campus
(13 minutes)
Raleigh Marriott Crabtree
4500 Marriott Drive
Raleigh, NC 27612
919-781-7000
9 miles from SAS Campus
(14 minutes)
Renaissance Raleigh NorthHills
4100 Main at North Hill St
Raleigh, NC 27609
919-571-8773
10 miles from SAS Campus
(15 minutes)
Embassy Suites Brier Creek
8001 Arco Corp. Dr
Raleigh, NC 27617
919-572-2200
10 miles from SAS Campus
(15 minutes)

How to Start a Business - Online
2024-06-26 12:00 - 13:30 | Online Webinar
Topic: Start-up Assistance

Understand the basics of starting a for-profit business in this webinar that takes you from idea to opportunity. Learn key strategies for start-up, financing, and marketing, as well as important information about legal issues, licensing, zoning, operations, and more. Realize the importance of a self-assessment and how to evaluate the feasibility of your business idea. Discover the resources available to help you start and successfully operate your business.
Register by: 10:00 AM June 26
NOTE: For this webinar, there is a two-step registration process. Once you complete your registration with the Small Business Center (SBC), you should receive a confirmation email from centeric@centeric.ncsbc.net that includes a Zoom link for the second part of the registration process. If you do not see the confirmation message in your inbox, please check your junk/spam folder. In order to receive the video conferencing login information and guarantee your spot for the webinar, you must also register via the Zoom platform.

Speaker(s): Melissa Evans, SBC Director
Co-Sponsor(s):
Fee: No Cost
Register Online
Already Registered? Sign in for more information.

Phone: 252-246-1209
Email: msevans@wilsoncc.edu

Industry Day - 2024 Small Capacity Weight Handling Equipment Multiple Award Contract
2024-06-26 12:00 - 13:30 | Virtual: Microsoft Teams
A Weight Handling Equipment Industry Forum sponsored by Navy Crane Center will be held via Microsoft Teams on 26 June 2024 starting at 1200 Eastern time for those businesses interested in this procurement and that classify as a Small Business under North American Industry Standard 333923. The purpose of this Industry Forum is to provide information regarding the scope of the upcoming Small Capacity Weight Handling Equipment Multiple Award Contract (WHEMAC) and to provide other relevant information regarding the overall pre‐award and post‐award process for this proposed procurement.
This Small Capacity WHEMAC will be used primarily for the ordering of new, and the overhaul of existing, Weight Handling Equipment (WHE) of varying types (bridge cranes, jib cranes, monorail/hoist cranes, gantry cranes, etc.) and lifting capacities for Navy, Marine Corps and other federal activities worldwide. The work contemplated under this Small Capacity WHEMAC will include, but not be limited to: site survey/investigation; design; fabrication; crane rail alignment survey/installation; demolition/removal of existing cranes and equipment in compliance with environmental disposal restrictions; runway/equipment electrification; crane installation; crane testing; and operational training. Cranes will be designed and manufactured in accordance with CMAA 70 and CMAA 74 (as applicable) as modified by NAVCRANECENINST 11450.2A, and certifiable in accordance with NAVFAC P‐307. Application for use of the weight handling equipment to be procured under this Small Capacity WHEMAC is intended to primarily support General Purpose Service (GPS). However, it is not restricted from the procurement of more complex applications, including handling of fissionable materials, molten metals, ordnance, hazardous area applications as defined by the National Electric Code, and Special Purpose Service (SPS).
The Small Capacity WHEMAC will primarily be used for, but is not limited to, the procurement of new WHE and/or overhaul of existing WHE with the following characteristics:

Primarily less than or equal to than 30‐ton (60,000 lbs) capacity
Primarily up to a maximum single span of 60 feet

Span shall apply only to bridge and gantry cranes

Primarily for the procurement of General Purpose Service cranes
Allowance is made to permit the procurement of cranes outside of the above listed criteria if circumstances require.

The Government reserves the right to award up to a maximum of 10 Indefinite Delivery/Indefinite Quantity contracts under one Small Capacity WHEMAC. Award will be based on source selection criteria. This procurement is anticipated to be a small business setaside.
In order for the Government to better answer the questions of interested parties at the Industry Forum, please submit questions prior to the forum. All questions regarding the Small Capacity WHEMAC requirements should be submitted to Priscilla Gula, email address priscilla.l.gula.civ@us.navy.mil by 1600 Eastern time on 21 June 2024.
Participation in the Industry Forum is not a prerequisite for submitting any future proposal. However, it will provide a valuable opportunity for questions and answers. All registration requests to participate in the Industry Day should be submitted via email to Priscilla Gula, email address priscilla.l.gula.civ@us.navy.mil by 1600 Eastern time on 21 June 2024. Your request should include: 1) company name; 2) address; 3) telephone number; 4) email address; 5) Small Business Classification (i.e., small business, small disadvantaged, 8(a), HubZone, women‐owned, service‐disabled veteran owned); and 6) list of participants with work titles. An MS Teams meeting invitation will be forwarded to all registrants.
Participation in this Industry Forum is not to be construed as either a commitment by the Government to procure any items or services, or for the Government to pay costs for any information received. Participation in this Industry Forum is at the sole expense of the respondent.
Point of Contact
Priscilla Gula, Phone: (757)‐685‐5440, Email Address: priscilla.l.gula.civ@us.navy.mil

Build Winning Teams: Network and Collaborate on IDIQ Contracts
2024-06-27 15:00 - 16:30 | Smith Anderson Law Firm, 150 Fayetteville Street, Suite 2300, Raleigh, NC 27602
When. June 27, 2024 from 3:00 – 4:30 pm.
Where. Smith Anderson Law Firm, 150 Fayetteville Street, Suite 2300, Raleigh, NC 27602
Key highlights:

Upcoming IDIQ Opportunities: Learn about upcoming federal IDIQ opportunities (including Alliant 3, COMET II, EPICS II, and NIH BPSS IV), and how to maximize your position on multiple award and scorecard based contracts. We will discuss the infrastructure needed to monetize your place on the contract.

Uncompensated Overtime Policy (UOP): IDIQs often require offerors to address their Uncompensated Overtime Policy. We will discuss the updated, and sometimes confusing, FAR 52.237-10 and its relationship with contractor UOPs.

Enforceability of Teaming Agreements: When is a prime/ subcontractor teaming agreement an enforceable contract, and when is it an unenforceable agreement to agree? Learn more about teaming agreement enforceability as you develop your teaming strategy.

Q&A: Have your questions answered about IDIQ opportunities in this interactive session.

Networking: Connect with industry peers and potential partners and teammates. Exchange ideas, discuss challenges, and explore collaboration opportunities in an informal setting.

Who should attend?

Business Development Managers | Capture Managers
Proposal Managers | Procurement Professionals
Project Managers | Legal Advisors | Government Representatives
Anyone interested in learning more about IDIQ contracts

REGISTER

Hybrid DEFTECH Coffee Call Announcement: Friday, June 28, 2024
2024-06-28 08:00 - 11:00 | First Flight Venture Center, 2 Davis Drive, Research Triangle Park, NC, 27709, United States
Join us in person this Friday for the DEFTECH Coffee Call, where we spotlight two prestigious institutions and their contributions to innovation and commercialization. This event will be a hybrid format, held in-person at the First Flight Venture Center, 2 Davis Drive, RTP, and virtually. Dive into inspiring discussions and explore groundbreaking advancements in technology and commercialization.
Agenda:
8:00 – 9:00 AM (EST): NC State University Industry Expansion Solutions
• Presenter: Mitch Poteat, Regional Manager, Research Triangle
• Topic: Discover the latest initiatives and programs at the NCSU Industrial Extension Service (IES). Learn how NCSU IES is fostering innovation, providing critical support to industry partners, and driving economic growth through technology and expertise.
9:00 – 10:00 AM (EST): UNC Innovate Carolina
• Presenter: Harmen Steele, Commercialization Manager, UNC-Chapel Hill Office of Technology Commercialization
• Topic: Explore the innovative strategies at UNC Innovate Carolina for translating cutting-edge research into real-world applications. Gain insights into their approach to identifying promising technologies, securing IP protection, evaluating market potential, and fostering collaborations to bring groundbreaking inventions to market.
10:00 – 11:00 AM (EST): Networking
Why Attend:
• Engage with Experts: Connect with leaders from NCSU IES and UNC Innovate Carolina who are at the forefront of innovation and commercialization.
• Expand Your Network: Build valuable connections within the NC Innovation Ecosystem and beyond.
• Gain Insights: Understand the strategic initiatives and collaborative opportunities that can enhance innovation and commercialization efforts.
Location: First Flight Venture Center
2 Davis Drive, RTP
Format: Hybrid (In-person and Virtual)
We look forward to your participation in this enriching event. Let’s collaborate to drive innovation and enhance our nation’s technology commercialization capabilities.
Join us this Friday and be part of the conversation that shapes the future of innovation and commercialization.
🔗 Join us here:
*2024 Coffee Call Connection Options*
1. Join via Teams on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 266 787 473 943 Passcode: [REDACTED]
Download Teams | Join on the web
2. Call in (audio only)
+1 980-296-2533,,802776946# United States, Charlotte
Phone Conference ID: 802 776 946#
Find a local number | Reset PIN
Learn More | Meeting options
For questions or assistance, contact the North Carolina Defense Technology Transition Office (DEFTECH)
Bob Burton
DEFTECH Director
burtonr@ncmbc.us
910-824-9609

Supplier Matching as a Tool for Business Growth for North Carolina Manufacturers
2024-07-11 10:00 - 11:00 | Live Webinar
Who Should Attend
Manufacturers with extended lead times and increased frustration with their current supply chain or those with excess capacity seeking supplier opportunities.
REGISTER TO ATTEND

Do you have a supplier need or would you like to become a supplier to another company? Supplier matching is a powerful tool that can help North Carolina manufacturers connect with suitable suppliers. Manufacturers can streamline their operations, improve product quality and ultimately drive business growth by finding suppliers who align with their specific needs and goals.
This webinar will provide information on the North Carolina Manufacturing Extension Partnership supplier matching program, the types of opportunities available and how to access these no-cost supplier sourcing and matching services. Participants will leave the webinar with an understanding of how they can participate in the program to grow their business and ultimately strengthen supply chains in North Carolina and the country.

Key Takeaways:

What resources are available in NC
How you can tap into a network of suppliers in NC
Use a resource to help you map your current supply chain

Presenter
KeAnne Hoeg
Director of Data Management Systems, Supplier Matching and Reporting, NC State University Industry Expansion Solutions
Email: keanne_hoeg@ncsu.edu | Phone: 919.368.7387
Keanne describes her job as “playing with data.” Her data and reporting group manage required reporting to stakeholders and several internal applications, including the Salesforce CRM system, reporting development, and data analysis and visualization. In addition to overseeing required stakeholder reporting and systems, KeAnne manages the Center’s supplier Matching program. Her supplier matching team oversees the Manufactured in North Carolina (MNC) online supplier matching database; works with manufacturers to assess their needs, identify possible matches and create and respond to opportunities in the national supplier matching program; and mapping key supply chains within North Carolina.
KeAnne has worked at Industry Expansion Solutions for 23 years; before moving into her current position, she worked as a web developer and social media manager in IT and marketing. KeAnne has a B.A. in English from Meredith College and an MSLS in library science from UNC-Chapel Hill.
REGISTER TO ATTEND

Virtual DEFTECH Coffee Call: Enhancing Homeland Security with Innovation
2024-07-12 08:00 - 10:00 | Virtual: Microsoft Teams
Join us for an enlightening DEFTECH Coffee Call featuring Christopher A. White | OFO Innovation Center | Office of Field Operations | U.S. Customs and Border Protection. This session will provide valuable insights into the pivotal role of the U.S. Customs and Border Protection (CBP) within homeland security and the innovative business processes and technology requirements that support their mission.
As a cornerstone of the third annual Federal Technology Symposium on August 6, 2024, FTS ’24 and Road To War, the DEFTECH Coffee Call, and associated activities are a robust roadmap for catalyzing defense innovation and optimizing your engagement with the federal government.
Planned Events for the Federal Technology Symposium (FTS ’24) Road To War (RTW):
Click to register for these events.
REGISTER: Federal Technology Symposium on August 6, 2024
Agenda:
8:00 – 9:00 AM (EST): Presentation by David Mroczka | President & CEO | AI Strategy Corporation​​​

Overview of the Summer of Scouting Event:

Details on the DoD Technology Summer of Scouting, sponsored by NAVSEA, ARMY, AFWERX, and NAVAIR.
Insight into the scouting process, with a live showcase on October 29, 2024.

9:00 – 10:00 AM (EST): Presentation by Christopher A. White

Overview of U.S. Customs and Border Protection (CBP): Learn about CBP’s mission and importance.

Strategic Role in Homeland Security: Understand CBP’s operations in preventing terrorism and facilitating trade and travel.
Innovations and Business Processes: Explore how CBP enhances operational efficiency with advanced technologies.
Technology Requirements: Gain insights into CBP’s specific technology needs and priorities.

Q&A Session: Engage with Chris to understand CBP’s impact on national security.

Why Attend:

Engage with Experts: Learn from Christopher A. White and CBP technology requirements.
Expand Your Network: Connect with professionals in homeland security and technology scouting.
Gain Insights: Understand initiatives to enhance national security.

For more information on CBP:

About CBP
CBP Business Connection

Stay Connected:

Register for the August 6, 2024, Federal Technology Symposium (FTS ’24): Federal Technology Symposium
Participate in NCMBC/DEFTECH Federal Technology Symposium & Road To War Activities: FTS ’24 Road To War Survey.

We look forward to your participation!
*Coffee Call Connection Options*
1. Join via Teams on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 266 787 473 943 Passcode: [REDACTED]
Download Teams | Join on the web
2. Call in (audio only)
+1 980-296-2533,,802776946# United States, Charlotte
Phone Conference ID: 802 776 946#
Find a local number | Reset PIN
Learn More | Meeting options

For questions or assistance, contact the North Carolina Defense Technology Transition Office (DEFTECH)
Bob Burton | DEFTECH Director | burtonr@ncmbc.us | 910-824-9609
TJ Gilroy | DEFTECH Program Manager | gilroyt@ncmbc.us | 910-638-4489
Jaycie Beam | DEFTECH Program Support Specialist | beamj@ncmbc.us
Todd Ferry | DEFTECH Program Manager | ferryt@ncmbc.us | 252-721-1775

NCMS TECHNOLOGY SHOWCASE FLEET READINESS CENTER EAST
2024-07-15 08:00 - 2024-07-18 17:00 | Riverfront Convention Center of Craven County
In collaboration with the Eastern North Carolina (ENC) Tech Bridge, Fleet Readiness Center East (FRCE), and Craven County Economic Development, National Center for Manufacturing Sciences (NCMS) is hosting a Technology Showcase at the Riverfront Convention Center of Craven County July 15-18 in New Bern, North Carolina.
This technology showcase will be held in conjunction with the debut of the ENC Tech Bridge off-base facility and ribbon cutting ceremony. The ENC Tech Bridge, through a partnership with FRCE and Craven County, facilitates strategic connections to accelerate creativity and innovation that deliver capability, capacity, and readiness to the Navy and Marine Corps.
FRCE – North Carolina’s largest aviation maintenance, repair, overhaul, and technical services provider – helps supply Sailors and Marines with innovative solutions to complex problems and supports future growth by connecting brains to planes.
Industry and academia partners are invited to share potential innovations in technology that can support the goal of the Tech Bridge initiative, which is to rapidly deliver innovative capabilities to service members across the globe. Engineers, artisans, and leadership from the Navy and Marine Corps will be in attendance and are eager to view the demonstration of next generation technologies that may relate to their maintenance challenges.
Along with the technology showcase happening at the Riverfront Convention Center, this event features a unique opportunity for select companies to demonstrate their technologies at the ENC Tech Bridge facility during its debut event. Once event registration has closed, representatives from the ENC Tech Bridge team will hand-select companies for this opportunity, based on the technology and how it pertains to the Tech Bridge.
REGISTER

Where: Riverfront Convention Center of Craven County
203 South Front Street
New Bern, NC 28560

EDPNC Go Global Road Show (Multiple Locations)
2024-07-15 08:00 - 2024-07-18 17:00 | Various Locations
Your passport to global sales starts with export knowledge from the experts.
The Economic Development Partnership of North Carolina’s (EDPNC) International Trade team maintains overseas offices that help companies like yours prosper in North Carolina by growing revenue through exporting. Once a year, this team of experts goes on the road to bring their expertise directly to you!
You’ll have the opportunity to meet and work with our Foreign Trade Representatives and learn about opportunities in global markets including Canada, Mexico, Europe, and the Middle East.
Whether your company is currently exporting, export-ready, or you are interested in learning more about developing international marketing, the Go Global Road Show is an excellent opportunity for North Carolina companies to develop new foreign markets that can increase exports and profits.
Our Foreign Trade Representatives and International Trade Managers will:

Conduct one-on-one consultations with export-ready companies.
Show country specific presentations on targeted foreign markets.
Provide introductions and networking opportunities to other companies.

Representatives from the North Carolina Department of Agriculture, Small Business and Technology Development Center (SBTDC), and US Commercial Service will also be available at each location.
Road Show attendees will also participate in individual one-on-one meetings with the EDPNC’s Foreign Office Directors. Lunch will also be provided during a presentation on foreign markets.
Contact Mike Hubbard to register.
VIEW ALL EXPORT EVENTS

Road Show Schedule
Monday, July 15
Rowan-Cabarrus Community College
NC Research Campus & Advanced Technology Center
399 Biotechnology Lane, Kannapolis, NC 28081
There will be 30-minute one-on-one meetings from 9:00 am to 12:00 pm and 2:00 pm to 4:00 pm. A networking lunch with the North Carolina trade representatives and the North Carolina international trade team will be held from 12:00 pm to 2:00 pm.
Tuesday, July 16
Forsyth Tech Community College
Mazie S. Woodruff Center
4905 Lansing Drive, Winston-Salem, NC 27105
There will be 30-minute one-on-one meetings from 9:00 am to 12:00 pm and 2:00 pm to 4:00 pm. A networking lunch with the North Carolina trade representatives and the North Carolina international trade team will be held from 12:00 pm to 2:00 pm.
Wednesday, July 17
Wake Tech Community College Western Campus
3434 Kildaire Farm Road, Cary, North Carolina 27518
There will be 30-minute one-on-one meetings from 9:00 am to 12:00 pm and 2:00 pm to 4:00 pm. A networking lunch with the North Carolina trade representatives and the North Carolina international trade team will be held from 12:00 pm to 2:00 pm.
Thursday, July 18
Aerospace & Advanced Manufacturing Center at North Carolina Global Transpark
3800 Highway 58 North, Kinston, NC, 28504
There will be 30-minute one-on-one meetings from 10:00 am to 12:00 pm and 1:30 pm to 3:00 pm. A networking lunch with the North Carolina trade representatives and the North Carolina international trade team will be held from 12:00 pm to 1:30 pm. Multics

Understanding Project Labor Agreements for Federal Contractors
2024-07-17 09:00 - 11:30
About. The purpose of this webinar is to have a dialogue with industry and representatives from the North American Building Trade Union (NABTU) to gain a better understanding of the Executive Order regarding Project Labor Agreements (PLAs) over 35 million on federal construction projects.
Guest speaker. Stephen W. Courtien, Special Assistant to Secretary-Treasurer of NABTU
Registration. This is a free webinar, however registration is required to receive log-in credentials.
REGISTER

In person DEFTECH Coffee Call
2024-07-26 08:00 - 11:00 | First Flight Venture Center, 2 Davis Drive, Research Triangle Park, NC, 27709, United States
As a cornerstone of the third annual Federal Technology Symposium on August 6, 2024, FTS ’24, the DEFTECH Coffee Call, and associated Road To War activities are a robust roadmap for catalyzing defense innovation and optimizing your engagement with the federal government.
Click to register to attend in person and for for RTW events.
Planned Events for the Federal Technology Symposium (FTS ’24) Road To War (RTW)
Join us in person for the DEFTECH Coffee Call, dedicated to celebrating the 4th anniversary of innovation and collaboration within the North Carolina Innovation Ecosystem! This event will be a hybrid format, held in-person at the First Flight Venture Center, 2 Davis Drive, RTP, and virtually.
Agenda:
8:00 – 9:00 AM (EST): Celebrate 4 Years of Coffee Calls and Overview of “Teaming to Win” in the Federal Marketplace

Innovation Community Presentations: Engage with the DEFTECH Community through dynamic presentations highlighting the NC Innovation Ecosystem.
Manveer Sandhu, Associate, Plug and Play Tech Center Overview: We drive innovation and empower the future with corporations, governments, startups, investors, and universities.
Overview of “Teaming to Win” in the Federal Marketplace:

Presenter: Reena Bhatia, Federal Business Development, Raleigh
Gain insights into successful teaming strategies for winning federal contracts.

9:00 – 10:00 AM (EST): Office of Science, Technology & Innovation (OSTI)

Keynote Address: Hear from John Hardin, Executive Director, Office of Science, Technology & Innovation (OSTI), North Carolina Department of Commerce about the impact and future of the NC Innovation Ecosystem.

10:00 AM – 11:00 AM (EST): Networking

Networking: Build valuable connections within the NC Innovation Ecosystem and beyond, engaging in meaningful conversations and collaborations.

Why Attend:

Engage with Innovators: Connect with leaders and innovators driving advancements in federal security and defense technologies.
Expand Your Network: Build valuable connections within the NC Innovation Ecosystem and beyond.
Celebrate Milestones: Join us in celebrating the 4th anniversary of the DEFTECH Coffee Call and the incredible work being done in North Carolina.

We look forward to your participation in this enriching event. Let’s collaborate to drive innovation and enhance our nation’s security and defense capabilities.
Event Details:

Date: July 26, 2024
Time: 8:00 AM – 11:00 AM ET
Location: Hosted by the First Flight Venture Center, 2 Davis Drive, RTP, NC 27709

Thank you for your continued support and engagement.
*2024 Coffee Call Connection Options*
1. Join via Teams on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 266 787 473 943 Passcode: [REDACTED]
Download Teams | Join on the web
2. Call in (audio only)
+1 980-296-2533,,802776946# United States, Charlotte
Phone Conference ID: 802 776 946#
Find a local number | Reset PIN
Learn More | Meeting options

2024 Understanding and Utilizing MatchForce.org
2024-08-02 09:00 - 10:30 | Webinar
The North Carolina Military Business Center will host “Understanding and Utilizing MatchForce.org” virtually on the following dates:

February 2, 2024 from 0900-103o
May 2, 2024 from 0900-1030
August 2, 2024 from 0900-1030
November 1, 2024 from 0900-1030

About. This training is a comprehensive guide to using MatchForce as a tool for finding federal contracting opportunities and doing market research. In this training you will learn how MatchForce can be utilized to: match your business to contract opportunities automatically; effectively search and filter the internal database of federal contracting data; and help businesses (both prime and subcontractors) along with contracting officers do in-depth market research. Additionally, prime contractors will learn how to use the search function to search for businesses to perform subcontracting tasks, or to view businesses in an area that can perform work in certain industries. Potential subcontractors will learn how to use the search function to search for prime contractors that they may be able to partner with. Finally, you will learn how to easily access MatchForce’s internal database of federal contracting opportunities, government purchase card opportunities and future, forecast opportunities to always be aware of opportunities for your business.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Register

Safety and Health Management Basics – Webinar
2024-08-05 10:00 - 11:00 | Webinar via Zoom
FREE Timeout for Safety Webinar (1 hr MESH credit)
Experience the power of knowledge at our upcoming webinar on Safety and Health Management Basics. Join Jeff Main, as he delves into the essential principles and practices that will empower your organization to create an effective safety and health program. Don’t miss this opportunity to equip yourself with the knowledge to ensure the safety and well-being of your workforce. Register now and secure your spot at this essential webinar.
Register to Attend

Federal Technology Symposium
2024-08-06 08:30 - 17:00 | Tony Rand Student Center, Multipurpose room at Fayetteville Technical Community College, 2201 Hull Road, Fayetteville, NC, 28302
The third annual Federal Technology Symposium (FTS) is hosted by the Office of US Senator Thom Tillis, the Office of US Senator Ted Budd, Fayetteville Technical Community College (FTCC), the North Carolina Military Business Center, and the North Carolina Defense Technology Transition Office (DEFTECH).
When: August 6, 2024.
Where: Fayetteville Technical Community College
Tony Rand Student Center, Multi-Purpose Room (building #7)
2201 Hull Road, Fayetteville, NC
Campus Map: Parking is available in parking lots: 4, 6, & 10. View campus map.
About: The FTS will highlight the advanced technology needs of major military commands in North Carolina, the Department of Defense (DoD), and the Department of Homeland Security (DHS), along with the correlating capabilities of the innovation ecosystem in North Carolina and the Southeast. The Symposium aims to establish dialogue and partnerships between industry, academia, and government to address the future technology needs of America’s warfighters and security agencies.
Breakout Sessions: Beginning with a pressing tactical scenario and a series of in-depth roundtable discussions, thought leaders with diverse views will explore pressing Defense and Homeland Security needs and how they may be addressed collaboratively through an expansive innovation ecosystem. Discussions will include emerging technologies, collaboration for innovation, the future of warfare and security in the face of mounting threats, and demonstrations of dual-use advanced technologies that may help satisfy rapidly evolving requirements.
The value for you is a day to:

Engage with Innovators: Meet and interact with key personnel from government, academia, and industry all in one place, fostering critical collaborations.
Discover Solutions: Learn about cutting-edge technologies and strategies to address your organization’s challenges and gaps.
Expand Your Network: Strengthen your connections within the North Carolina Innovation Ecosystem, opening doors to future partnerships and opportunities.
Maximize Networking: Benefit from extensive networking opportunities to connect you with influential leaders, peers, and potential collaborators.
Broaden Perspectives: Gain insights from the Department of Homeland Security (DHS) and other federal agencies, expanding the scope of your understanding and capabilities.

REGISTER

2024 Introduction to Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS)
2024-08-08 09:00 - 10:30 | Webinar
The North Carolina Military Business Center will host “Introduction to Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS)” virtually on the following dates:

February 29, 2024 from 0900-1030
August 8, 2024 from 0900-1030

About. The Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS) is a web-based application that enables the vendor community to search for, view, and submit secure quotes on Requests for Quotations (RFQs). Through DIBBS, users can search for and view Requests for Proposal (RFPs), Invitations for Bid (IFB), Awards, and other procurement information. This training will provide an overview of DIBBS registration; searching solicitations; accessing technical data; submitting quotes; and searching awards.
Registration. This is a free webinar; however, pre-registration is required in order to receive the virtual platform credentials. Credentials will be emailed out a few days prior to the training.
Register
